| WeChat: +86.13328318872 | Home | InSite Search | About Us | Contact Us |
|
|
|
||
|
||||
| Made in China This webpage is to be refreshed to Meteorological Balloon in 120 seconds. |
 |
Medical Dental Grade TPI Granules, Synthetic Gutta Percha, Trans PolyIsoprene, TPI, Trans Isoprene Rubber, Trans-1,4-PolyIsoprene |  |
V-Belts |  |
China Largest Manufacturer of Meteorological Balloons | ||
Rimpex@RPM supplies meteorological balloons, weather balloons, sounding balloons, pilot balloons, colorful meteorological balloons, aerological sounding balloons, atmospheric exploration balloons, aerological balloons, atmospheric balloons from the largest manufacturer of meteorological balloons in China.
 China Largest Manufacturer Meteorological Balloons - |
 Colorful Meteorological Balloons - - |
 Meteorological Balloon with Aerological Sounding Instruments Atmospheric Exploration Apparatus |
 Meteorological Balloon |
 Meteorological Balloon Laboratory Instruments |
 Meteorological Balloon Electrolyzed Hydrogen Charging |
 Meteorological Balloon Laboratory Apparatus |
Radiosonde | Radiosonde |
Key Technical Parameters of Meteorological Balloons
| # | Specification (g) | Neck Diameter (cm) | Diameter at Burst (cm) | Average Bursting Altitude (m) | Color | Average Rate of Ascent (m/min) |
| 1 | 10 | ≤2.4 | ＞60 | 7000 | Red, Black or Natural | 100 |
| 2 | 30 | ≤3.4 | ＞100 | 10000 | 200 | |
| 3 | 50 | ≤3.9 | ＞120 | 12000 | 200 | |
| 4 | 100 | ≤4.5 | ＞180 | 15000 | 200 | |
| 5 | 200 | ≤6.4 | ＞300 | 17000 | ≥340 | |
| 6 | 300 | ≤6.4 | ＞380 | 18000 | Natural | |
| 7 | 350 | ≤6.4 | ＞410 | 20000 | ||
| 8 | 400 | ≤6.4 | ＞450 | 21000 | ||
| 9 | 500 | ≤6.4 | ＞500 | 25000 | ||
| 10 | 600 | ≤6.4 | ＞580 | 26000 | ||
| 11 | 750 | ≤6.4 | ＞650 | 28000 | ||
| 12 | 800 | ≤6.4 | ＞680 | 29000 | ||
| 13 | 950 | ≤6.4 | ＞720 | 30000 | ||
| 14 | 1000 | ≤7.7 | ＞750 | 31000 | ||
| 15 | 1200 | ≤8.3 | ＞850 | 32000 | ||
| 16 | 1500 | ≤8.3 | ＞950 | 33000 | ||
| 17 | 1600 | ≤8.3 | ＞1050 | 36000 | ||
| 18 | 2000 | ≤8.3 | ＞1100 | 38000 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_1 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_2 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_3 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_4 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_5 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_6 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_7 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_8 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_9 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_10 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_11 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_12 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_13 |
 Hydrogen Charging Procedures With Nozzle For Meteorological Balloon_14 |
 Nozzle For Hydrogen Charging Meteorological Balloons |
Fasten neck of pre-releasing balloon on the nozzle and rotate it on foundation to the left. Connect inlet nozzle of the foundation with rubber pipe of hydrogen cylinder tightly. Weight of hydrogen depends on needs of operator. After the installation of weight (includes total weight of the foundation and nozzle), operator can open controller of the hydrogen cylinder and let hydrogen fill into balloon slowly. Take balloon down from metal nozzle until the balancer reaching to a certain height with expansion of balloon. MAINTENANCE |
||
| Copyright © Rimpex@RPM Since 2002 www.rubberimpex.com Sitemap XIAMEN RPM IMP.&EXP. CO.,LTD. |
