RPM - Rimpex - Logo
 
www.rubberimpex.com www
 
Chinese Version Contact with Rimpex@RPM, China
婵銈呭帯閺夆晜绋戦崵顓㈠矗閿濆洨绉笯闁告﹫绠撳Λ顒佹姜椤掑嫧鍋撻悢鑽ょ闁告垵鎼ぐ娑㈠嫉婢舵劖顎欓柛蹇e墮�?- Rimpex - Rubber Import & Export Website

 
Ϣ

V-Belts

Made in China

Chinese Version
 
  Medical Dental Grade TPI Granules, Synthetic Gutta-Percha, TransIsoprene Rubber, Trans PolyIsoprene, TPI, Trans-l,4-PolyIsoprene Medical Dental Grade TPI Granules, Synthetic Gutta Percha, Trans PolyIsoprene, TPI, Trans Isoprene Rubber, Trans-1,4-PolyIsoprene V-Belts V-Belts China Largest Manufacturer Of Meteorological Balloons China Largest Manufacturer of Meteorological Balloons  

       Rimpex@RPM supplies v-belts including wrapped v-belts, cogged v-belts, narrow wedge wrapped v-belts, poly ribs v-belts, banded classical v-belts, banded narrow wedge v-belts, industrial t-teeth timing belts, agricultural v-belts, industrial curvilinear teeth timing belts, double v-belts, conveyor belts, delivery v-belts and raw edge cogged v-belts, etc. which are made of rubbers (polyesters) and fabrics (nylon), with features such as heat resistant, and/or oil resistant, and/or high temperature resistant, and/or chemical resistant, and/or cold resistant, etc.
       The manufacturer locates in Kaifeng city, which was once the capital of seven dynasties in China, it is a key and high-tech enterprise of rubber products with rubber/plastic modification R&D works as its core, it integrates production, sales, R&D and services into a whole solution, and mainly produces rubber v-belts, conveyor v-belts, cut-edged v-belts, industrial fabrics, etc. as China famous brand. The manufacturer has won titles including “Henan Province AAA Industrial Enterprises of Quality and Integrity", "Standardized Good Behavior Enterprise" and "Top 100 Henan Private Enterprises in Manufacturing Industry? it also has taken the lead in passing various system certifications in the industry such as ISO9001, ISO14001, OHHAS18001, Integration of IT Application with Industrialization IQS Implementation System Certification, Product Quality Credit Certification, and Safety Mark Certification on Mining Products.The manufacturer is the vice-chairman unit of the rubber hose and tape branch of China Rubber Association. It has been in the leading position in the industry for ten consecutive years, and has participated in the formulation of national and industry standards, and owns many national patents, its products are widely used in the industry of coal mine, steel, oil, textile and other industries, sold all over China and exported to many other countries and regions. With first-class production technology and excellent product quality, the manufacturer will adhere to the business philosophy of “earnest working, being honest, win-win results and continuous success" and move ahead pragmatically.
01 V-Belts Manufacturer, Office, Factory
01 V-Belts Manufacturer
Office, Factory
02 Safety Certificate of Approval for Mining Products
02 Safety Certificate of Approval
for Mining Products
03 Environment and Quality Management System Certification Certificates
03 Environment and Quality Management
System Certification Certificates
04 Invention Patent, and Occupational Health and Safety Management System Certification
04 Invention Patent and
Occupational Health and Safety
Management System Certification
05 V-Belts Experimental Equipment in Lab of V-Belts Manufacturer
05 V-Belts Experimental Equipment
in
Lab of V-Belts Manufacturer
06 V-Belts Experimental Equipment in Lab of V-Belts Manufacturer
06 V-Belts Experimental Equipment
in
Lab of V-Belts Manufacturer
07 V-Belts Productive Equipment in Lab of V-Belts Manufacturer
07 V-Belts Productive Equipment
in Lab of V-Belts Manufacturer
08 V-Belts Productive Equipment in Lab of V-Belts Manufacturer
08 V-Belts Productive Equipment
in Lab of V-Belts Manufacturer
09 V-Belts Productive Equipment in Lab of V-Belts Manufacturer
09 V-Belts Productive Equipment
in Lab of V-Belts Manufacturer
10 Classical Wrapped V-Belts Y ZO A B C D E F
10 Classical Wrapped V-Belts
Y ZO A B C D E F
11 Cogged V-Belts 3VX 5VX 8VX XPZ XPA XPB XPC AX BX CX
11 Cogged V-Belts
3VX 5VX 8VX XPZ XPA XPB XPC AX BX CX
12 Narrow Wedge Wrapped V-Belts 3V9N 5V15N 8V25N SPZ SPA SPB SPC
12 Narrow Wedge Wrapped V-Belts
3V9N 5V15N 8V25N SPZ SPA SPB SPC
13 Poly Ribs V-Belts PH PJ PK PL PM
13 Poly Ribs V-Belts
PH PJ PK PL PM
-
-
14 Banded Classical V-Belts HA HB HC HD AJ BJ CJ DJ, Banded Narrow Wedge V-Belts 3V9J 5V15J 8V25J
14 Banded Classical V-Belts
HA HB HC HD AJ BJ CJ DJ
Banded Narrow Wedge V-Belts
3V9J 5V15J 8V25J
15 Industrial T Teeth Timing Belts MXL XL L H XH XXH T2.5 T5 T10 T20 AT10 AT20
15 Industrial T-Teeth Timing Belts
MXL XL L H XH XXH
T2.5 T5 T10 T20
AT10 AT20
16 Agricultural V-Belts HI HJ HK HL HM
16 Agricultural V-Belts
HI HJ HK HL HM
-
-
17 Industrial Curvilinear Teeth Timing Belts H3M H5M H8M H14M H20M S3M S5M S8M S14M R3M R5M R8M R14M
17 Industrial Curvilinear Teeth Timing Belts
H3M H5M H8M H14M H20M
S3M S5M S8M S14M
R3M R5M R8M R14M
18 Double V-Belts HAA HBB HCC
18 Double V-Belts
HAA
HBB
HCC
19 Delivery V-Belts, Polyester, Nylon, Heat Resistant, Conventional Oil Resistant, High Temperature Resistant, Chemical Resistant, Cold Resistant, Patterned, Endless, Conveyor Belts
19 Delivery V-Belts
Polyester, Nylon, Heat Resistant
Conventional Oil Resistant
High Temperature Resistant, Chemical Resistant
Cold Resistant, Patterned, Endless
Conveyor Belts
20 Classical Wrapped V-Belts, Section View Top Width Pitch Width Height Angle, Y Z A B C D E
20 Classical Wrapped V-Belts
Section View Top Width Pitch Width Height Angle
Y Z A B C D E
-
-
-
21 Classical Wrapped V-Belts Fire Resistant, Section View Top Width Pitch Width Height Angle, MVA MVB MVC MVD MVE
21 Classical Wrapped V-Belts Fire Resistant
Section View Top Width Pitch Width Height Angle
MVA MVB MVC MVD MVE
-
-
-
22 Narrow Wedge Wrapped V-Belts, Section View Top Width Pitch Width Height Angle, 3V9N 5V15N 8V25N, SPZ SPA SPB SPC
22 Narrow Wedge Wrapped V-Belts
Section View Top Width Pitch Width Height Angle
3V9N 5V15N 8V25N
SPZ SPA SPB SPC
23 Narrow Wedge Wrapped V-Belts Fire Resistant, Section View Top Width Pitch Width Height Angle, MV3V9N MV5V15N MV8V25N, MVSPZ MVSPA MVSPB MVSPC
23 Narrow Wedge Wrapped V-Belts Fire Resistant
Section View Top Width Pitch Width Height Angle
MV3V9N MV5V15N MV8V25N
MVSPZ MVSPA MVSPB MVSPC
24 Banded Classical V-Belts, Section View Top Width Pitch Width Height Angle, AJ BJ CJ DJ
24 Banded Classical V-Belts
Section View Top Width Pitch Width Height Angle
AJ BJ CJ DJ
-
25 Banded Narrow Wedge V-Belts, Section View Top Width Pitch Width Height Angle, 3V9J 5V15J 8V25J SPZ SPA SPB SPC
25 Banded Narrow Wedge V-Belts
Section View Top Width Pitch Width Height Angle
3V9J 5V15J 8V25J SPZ SPA SPB SPC
26 Agricultural V-Belts, Section View Top Width Pitch Width Height Angle, HI HJ HK HL HM
26 Agricultural V-Belts
Section View Top Width Pitch Width Height Angle
HI HJ HK HL HM
27 Double V-Belts, Section View Top Width Pitch Width Height Angle, HAA HBB HCC
27 Double V-Belts
Section View Top Width Pitch Width Height Angle
HAA HBB HCC
28 Classical Raw Edge Cogged V-Belts, Section View Top Width Pitch Width Height Angle, ZX AX BX CX
28 Classical Raw Edge Cogged V-Belts
Section View Top Width Pitch Width Height Angle
ZX AX BX CX
29 Narrow Wedge Raw Edge Cogged V-Belts, Section View Top Width Pitch Width Height Angle, 3VX9N 5VX15N XPZ XPA XPB XPC
29 Narrow Wedge Raw Edge Cogged V-Belts
Section View Top Width Pitch Width Height Angle
3VX9N 5VX15N XPZ XPA XPB XPC
30 Poly Ribs V-Belts, Section View Top Width Pitch Width Height Angle, PH PJ PK PL PM
30 Poly Ribs V-Belts
Section View Top Width Pitch Width Height Angle
PH PJ PK PL PM
31 Industrial T Teeth Timing Belts, Section View Top Width Pitch Width Height Angle, MXL XL L H XH XXH, T2.5 T5 T10 T2660 AT5 AT10 AT20
31 Industrial T Teeth Timing Belts
Section View Top Width Pitch Width Height Angle
MXL XL L H XH XXH
T2.5 T5 T10 T2660 AT5 AT10 AT20
32 Industrial Curvilinear Teeth Timing Belts, Section View Top Width Pitch Width Height Angle, H3M H5M H8M H14M H20M S3M S5M S8M S14M R3M R5M R8M R14M
32 Industrial Curvilinear Teeth Timing Belts
Section View Top Width Pitch Width Height Angle
H3M H5M H8M H14M H20M
S3M S5M S8M S14M R3M R5M R8M R14M
33 Nylon Delivery V-Belts, Conveyor Belts, NN100 NN150 N200 NN250 NN300 NN400 NN500
33 Nylon Delivery V-Belts
Conveyor Belts
NN100 NN150 N200 NN250
NN300 NN400 NN500
34 Polyester Delivery V-Belts Conveyor Belts, EP80 EP100 EP150 EP200 EP250 EP300 EP350 EP400 EP500
34 Polyester Delivery V-Belts Conveyor Belts
EP80 EP100 EP150 EP200 EP250
EP300 EP350 EP400 EP500
35 Conventional Conveyor Belts, H D L
35 Conventional Conveyor Belts
H D L
-
 


20 Classical Wrapped V-Belts, Section View Top Width Pitch Width Height Angle, Y Z A B C D E
20 Classical Wrapped V-Belts
Section View Top Width Pitch Width Height Angle
Y Z A B C D E
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
Z 10 8.5 6 40° La=Li+20 13"-120" 330-3048 Li
A 13 11.0 8 40° La=Li+30 14"-394" 356-10008 Li
AB 15 12.5 9 40° La=Li+35 47"-394" 1194-10008 Li
B 17 14.0 11 40° La=Li+40 19"-748" 483-19000 Li
BC 20 17.0 12.5 40° La=Li+48 47"-394" 1194-10008 Li
C 22 19.0 14 40° La=Li+58 29"-600" 737-15240 Li
CD 25 21.0 16 40° La=Li+61 47"-394" 1194-10008 Li
D 32 27.0 19 40° La=Li+75 80"-787" 2032-20000 Li
E 38 32.0 23 40° La=Li+80 118"-787" 2997-20000 Li
F 50 42.5 30 40° La=Li+120 177"-600" 4500-15240 Li

Features:
Ordinary wrapped V-belts have advantages of high strength and low elongation. The matching tolerance is small. Fatigue resistance up to 10^7 times or more.
Identification Marks:
The identification of ordinary classical wrapped V-belt is marked by the inner circumference and reference length of the V-belt. The conversion relationship of each model is shown in the table below.
Mask Example:
Model A 1300Li 1330Ld
A: Ordinary cloth covered V-belt model: type A
1300Li: Inner circumference length of ordinary cloth covered V-belt: 1300mm
1330Ld: Standard length of ordinary classical wrapped V-belt: 1330mm

Physical Properties of Ordinary Classical Wrapped V-Belt, China Standard GB/T1171-2017
Type Tensile Strength
KN, ?/td>
Reference Force Elongation
%, ?/td>
Adhesive Strength of Cord
KN/m, ?/td>
Adhesion of Inter Layer,
KN/m, ?/td>
Wrapped V-Belts Raw Edge V-Belts Wrapped V-Belts Raw Edge V-Belts
Y 1.0 7.0 5.0 10.0 15.0 -
Z 2.0 13.0 25.0
A 3.0 17.0 28.0
B 5.0 21.0 28.0 2.0
C 9.0 27.0 35.0
D 15.0 - 31.0 -
E 20.0 31.0 -


21 Classical Wrapped V-Belts Fire Resistant, Section View Top Width Pitch Width Height Angle, MVA MVB MVC MVD MVE
21 Classical Wrapped V-Belts Fire Resistant
Section View Top Width Pitch Width Height Angle
MVA MVB MVC MVD MVE
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
MVA 13 11.0 8.0 40° La=Li+30 14"-394" 356-10000 Li
MVB 17 14.0 11.0 40° La=Li+40 19"-748" 483-19000 Li
MVC 22 19.0 14.0 40° La=Li+58 20"-600" 737-15240 Li
MVD 32 27.0 19.0 40° La=Li+75 80"-787" 2032-20000 Li
MVE 38 32.0 23.0 40° La=Li+80 118"-787" 2997-20000 Li

Features:
Flame-retardant ordinary classical wrapped V-belt has the advantages of high strength, flame retardant, antistatic, high temperature resistance, low elongation, small group tolerance, fatigue resistance more than 10^7 times, etc., suitable for flammable and explosive working environments.
Identification Marks:
The identification of the flame-retardant ordinary classical wrapped V-belt is marked by the inner circumference and reference length of the V-belt. The conversion relationship of each model is shown in the above table.
Mask Example:
MVA 1321Li 1351Ld
MVA: Flame-retardant common wrapped V-belt model: Type A
1321Li: The length of the inner circumference of the flame-retardant ordinary cloth-covered V-belt is 1321mm
1351Ld: The reference length of flame-retardant ordinary classical wrapped v-belt is 1351mm



22 Narrow Wedge Wrapped V-Belts, Section View Top Width Pitch Width Height Angle, 3V9N 5V15N 8V25N, SPZ SPA SPB SPC
22 Narrow Wedge Wrapped V-Belts
Section View Top Width Pitch Width Height Angle
3V9N 5V15N 8V25N
SPZ SPA SPB SPC
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
3V(9N) 9.5 -
8.0
40° La=Li+50 16"-200" 406-5080 La
5V(15N) 16.0 -
13.5
40° La=Li+82 44"-394" 1100-10008 La
8V(25N) 25.5 -
23.0
40° La=Li+144 75"-600" 1905-15240 La
SPZ 10.0 8.0
8.0
40° La=Li+50 16"-200" 406-5080 La
SPA 13.0 11.0
10.0
40° La=Li+63 23"-200" 600-5080 La
SPB 17.0 14.0
14.0
40° La=Li+88 44"-394" 1118-10008 La
SPC 22.0 19.0 18.0 40° La=Li+113 71"-600" 1800-15240 La

Features:
The narrow wedge wrapped V-belt has large lateral strength, resistance to flexure, and the transmission power is 50-80% higher than that of ordinary V-belts, the transmission limit speed is 40m/s, and the transmission efficiency is more than 95%.
Identification Marks:
Narrow wrapped V-belts are divided into two categories: one is the standard width system SP series, the models are SPZ, SPA, SPB, SPC, the other is the effective width system series, the models are 3V(9N), 5V(15N) ), 8V(25N). The manufacturer marks the V-belt with the outer circumference. If the customer has special requirements, it should be noted on the goods list in order. The conversion relationship of each model is shown in the above table.

Mask Example #1:
SPA 2250La 2232Ld
SPA: Narrow cloth wrapping V-belt model: SPA type
2250La: Perimeter length 2250mm
2232Ld: Reference length 2232mm
Mask Example #2:
5V 900 15N2286La
5V: The narrow-shaped cloth-covered V-belt model is 5V
900: The imperial outer circumference is 90 inches
15N2286La: Metric outer circumference length is 2286mm


23 Narrow Wedge Wrapped V-Belts Fire Resistant, Section View Top Width Pitch Width Height Angle, MV3V9N MV5V15N MV8V25N, MVSPZ MVSPA MVSPB MVSPC
23 Narrow Wedge Wrapped V-Belts Fire Resistant
Section View Top Width Pitch Width Height Angle
MV3V9N MV5V15N MV8V25N
MVSPZ MVSPA MVSPB MVSPC
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
MV3V(9N) 9.5 -
8.0
40° La=Li+50 15"-200"
381-5080 La
MV5V(15N) 16.0 -
13.5
40° La=Li+82 44"-394" 1118-10008 La
MV8V(25N) 25.5 -
23.0
40° La=Li+144 75"-600" 1905-15240 La
MVSPZ 10.0 8.0
8.0
40° La=Li+50 16"-200" 406-5080 La
MVSPA 13.0 11.0
10.0
40° La=Li+63 23"-200" 600-5080 La
MVSPB 17.0 14.0
14.0
40° La=Li+88 44"-394" 1118-10008 La
MVSPC 22.0 19.0 18.0 40° La=Li+113 71"-600" 1800-15240 La
Features:
The flame-retardant narrow wrapped V-belt has large lateral rigidity, the transmission function is 50-100% higher than that of ordinary V-belts, the transmission limit speed is 44m/s, the transmission efficiency is more than 95%, flame retardant, antistatic, high temperature resistance, suitable for easy inflammable and explosive working environments.
Identification Marks:
Flame-retardant narrow wrapped V-belts are divided into two categories. One is the benchmark SP series, the models are SPZ, SPA, SPB, SPC; the other is the effective V series, the models are 3V (9N), 5V (15N) ), 8V(25N).
The manufacturer marks the V-belt with the outer circumference. If the customer has special requirements, it must be indicated on the list of goods in order. The conversion relationship of various models is shown in the above table.
Mask Example #1:
MVSPZ 1283La 1270Ld
MVSPZ: The model of the narrow-shaped wrapping V-belt is SPZ
1283La: The outer circumference is 1283mm
1270Ld: The reference length is 1270mm
Mask Example #2:
MVSPA 2000La 1982Ld
MVSPA: The model of the narrow-shaped wrapping V-belt is SPA type
2000La: The outer circumference is 2000mm
1982Ld: The reference length is 1982mm
Mask Example #3:
MVSPB 2022La 2000Ld
MVSPB: The model of the narrow-shaped wrapping V-belt is SPB
2022La: The outer circumference is 2022mm
2000Ld: The reference length is 2000mm
Mask Example #4:
MV3V 500 9N1270La
MV3V: The narrow-shaped cloth-covered V-belt model is 3V
500: The imperial outer circumference is 50 inches
9N1270La: Metric outer circumference length is 1270mm


24 Banded Classical V-Belts, Section View Top Width Pitch Width Height Angle, AJ BJ CJ DJ
24 Banded Classical V-Belts
Section View Top Width Pitch Width Height Angle
AJ BJ CJ DJ
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
AJ 13.6 15.6 10.0 40° Li=La-63 47"-197" 1200-5000 Li
BJ 17.0 19.0 13.0 40° Li=La-82 47"-394" 1200-10000 Li
CJ 22.4 25.5 16.0 40° Li=La-100 71"-590" 1800-15000 Li
DJ 32.8 37.0 21.5 40° Li=La-135 110"-650" 2800-16500 Li
Features:
The combined common V-belt is connected by multiple single common V-belts through the connection layer. Make it into a whole, so that the force of each belt is even, and it can bear a larger load. During transmission, the problem of different lengths of multiple single V-belts used in combination is solved, with high transmission efficiency and longer service life.
Identification Marks:
The identification sequence of the common V-belt of the joint group is the model, the number of the joint group, the length dimension, and the length identification.
The manufacturer marks the V-belt with the inner circumference. The conversion relationship of each model is shown in the above table.
Mask Example #1:
Industrial Union Group Ordinary V Belt
BJ 3X 1970Li
BJ: Common V-belt model of joint group, BJ type
3X: The number of common V-belt groups in the joint group is 3 groups
1970Li: The length of the inner circumference of the common V-belt in the joint group is 1970mm
Mask Example #2:
Agriculture Union Group Ordinary V Belt
3HB 1970Li
3HB: Common V-belt model of joint group, HB type, group number is 3 groups
1907Li: The length of the inner circumference of the common V-belt of the joint group is 1970mrn


25 Banded Narrow Wedge V-Belts, Section View Top Width Pitch Width Height Angle, 3V9J 5V15J 8V25J SPZ SPA SPB SPC
25 Banded Narrow Wedge V-Belts
Section View Top Width Pitch Width Height Angle
3V9J 5V15J 8V25J SPZ SPA SPB SPC
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
3V(9J) 9.7 10.3 9.7 40° La=Li+63 47"-197" 1200-5000 La
5V(15J) 15.7 17.5 15.7 40° La=Li+98 59"-394" 1500-10000 La
8V(25J) 25.4 28.6 25.4 40° La=Li+157 79"-650" 2000-16500 La
SPZ 10.5 - 10.0 40° La=Li+63 47"-197" 1200-5000 La
SPA 13.6 - 12.3 40° La=Li+78 47"-197" 1200-5000 La
SPB 17.0 19.05 16.5 40° La=Li+105 59"-394" 1500-10000 La
SPC 22.0 25.5 21.0 40° La=Li+132 118"-492" 3000-12500 La
Features:
The combined narrow V-belt is connected through the connecting layer, so that multiple single narrow V-belts become a whole, so that each belt is evenly stressed and can withstand larger loads. When driving, the problem of different lengths is solved when multiple single V-belts are used in combination, high transmission efficiency and longer service life.
Identification Marks:
The identification sequence of the joint narrow V-belt is model, joint number, length dimension, and length identification.
The company is marked by the outer circumference of the V belt. If the customer has special requirements, it should be noted on the goods list. The conversion relationship of each model is shown in the above table.
Mask Example #1:
SPB 3X 4000La
SPB: Joint group narrow V-belt model, SPB type
3X: The number of narrow V-belt groups in the joint group is 3 groups
4000La: The outer circumference of the narrow V-belt of the joint group is 4000mm
Mask Example #2:
8V(25J) 3X 5080La
8V(25J): Joint narrow V-belt model, 8V (25J) type
3X: The number of narrow V-belt groups in the joint group is 3 groups
5080La: The outer circumference of the narrow V-belt of the joint group is 5080mm


26 Agricultural V-Belts, Section View Top Width Pitch Width Height Angle, HI HJ HK HL HM
26 Agricultural V-Belts
Section View Top Width Pitch Width Height Angle
HI HJ HK HL HM
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
HI 25.4 23.6 12.7 - Li=La-80 67"-158" 1700-4013 Li
HJ 31.8 29.6 15.1 - Li=La-95 55"-118" 1400-3000 Li
HK 38.1 35.5 17.5 - Li=La-110 70"-197" 1800-5000 Li
HL 44.5 41.4 19.8 - Li=La-124 70"-197" 1800-5000 Li
HM 50.8 47.3 22.2 - Li=La-139 70"-197" 1800-5000 Li
Features:
The agricultural machinery V-belt has the characteristics of high strength, low elongation, large transmission power, stable transmission, good dimensional stability, convenient maintenance, and ability to absorb and resist instantaneous strong load impact.
Identification Marks:
The identification of the agricultural V-belt is marked by the length of the inner circumference. The conversion relationship of each model is shown in the above table.
Mask Example:
HK 2700Li
HK: V-belt model of agricultural machinery, HK type
2700Li: The inner circumference of the agricultural V-belt is 2700mm


27 Double V-Belts, Section View Top Width Pitch Width Height Angle, HAA HBB HCC
27 Double V-Belts
Section View Top Width Pitch Width Height Angle
HAA HBB HCC
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
HAA 13 - 10 40° Li=La-63 38"-197" 965-5000 Li
HBB 17 - 13 40° Li=La-82 39"-197" 1000-5000 Li
HCC 22 - 17 40° Li=La-107 83"-315" 2100-8000 Li
Features:
The hexagonal belt (double-sided V-belt) has multiple working surfaces, good flexibility, and can be applied to multi-axis transmission such as textiles and agricultural machinery.
Identification Marks:
The identification of the hexagonal belt is marked by the reference length of the V belt. The conversion relationship of each model is shown in the above table.
Mask Example:
HAA 2800Li 2831Ld
HAA: Hexagonal belt model, HAA type
2800Li: The inner circumference of the hexagonal belt is 2800mm
2831Ld: The reference length of the hexagonal belt is 2831mm


28 Classical Raw Edge Cogged V-Belts, Section View Top Width Pitch Width Height Angle, ZX AX BX CX
28 Classical Raw Edge Cogged V-Belts
Section View Top Width Pitch Width Height Angle
ZX AX BX CX
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
ZX 10.0 8.5 6.0 40° Li=La-22 20"-100" 508-2540 Li
AX 13.0 11.0 8.0 40° Li=La-30 20"-200" 508-5080 Li
BX 17.0 14.0 11.0 40° Li=La-40 20"-200" 508-5080 Li
CX 22.0 19.0 14.0 40° Li=La-58 30"-200" 762-5080 Li
Note: X means tooth type, REP means one layer of fabric, REL means three layers of fabric
Features:
Ordinary classical raw edge cogged V-belts have the characteristics of wear resistance, low heat generation, large friction coefficient, low bending loss, high transmission efficiency, etc., can absorb transmission vibration noise, have a long service life, and have a fatigue resistance of up to 10^8 times.
Identification Marks:
The identification of ordinary classical raw edge cogged V-belt is marked by the inner circumference. The conversion relationship of each model is shown in the above table.
Mask Example:
AX 1250Li 1280Ld
AX: The model of ordinary cutting v-belt is AX (tooth) type
1250Li: The inner circumference of the ordinary cutting V belt is 1250mm
1280Ld: The reference length of ordinary cutting V belt is 1280mm


29 Narrow Wedge Raw Edge Cogged V-Belts, Section View Top Width Pitch Width Height Angle, 3VX9N 5VX15N XPZ XPA XPB XPC
29 Narrow Wedge Raw Edge Cogged V-Belts
Section View Top Width Pitch Width Height Angle
3VX9N 5VX15N XPZ XPA XPB XPC
Type Top Width mm Pitch Width mm Height mm Angle Length Conversion Length Range Length Range mm Factory Mark
3VX(9N) 9.5 - 8 40° La=Li+50 20"-200" 508-5080 La
5VX(15N) 16.0 - 13.5 40° La=Li+85 30"-200" 762-5080 La
XPZ 10.0 8.5 8 40° La=Li+50 20"-200" 508-5080 La
XPA 13.0 11 10 40° La=Li+63 20"-200" 508-5080 La
XPB 17.0 14 14 40° La=Li+88 30"-200" 762-5080 La
XPC 22.0 19 18 40° La=Li+113 30"-200" 762-5080 La
Note: X means tooth type, REP means one layer of fabric, REL means three layers of fabric
Features:
The narrow wedge raw edge cogged V-belt has the characteristics of large friction coefficient, low bending loss, high transmission efficiency, etc., can absorb transmission vibration noise, long service life, and fatigue resistance.
Identification Marks:
Narrow wedge raw edge cogged V-belts are divided into two categories, one is the SP series based on the standard width, the models are XPZ, XPA, XPB, XPC, the other is the effective width V series, the models are 3VX, 5VX. The manufacturer marks the V-belt with the outer circumference. If the customer has special requirements, it must be indicated on the list of goods in order. The conversion relationship of each model is shown in the above table.
Mask Example:
XPA 2250La
XPA: The model of cutting narrow V-belt is XPA (tooth type)
2250La: The outer circumference of the cutting narrow V-belt is 2250mm
Mask Example:
5VX(15N) 2250La
5VX(15N): The model of cutting narrow V-belt is 5VX (tooth type)
2250La: The outer circumference of the cutting narrow V-belt is 2250mm


30 Poly Ribs V-Belts, Section View Top Width Pitch Width Height Angle, PH PJ PK PL PM
30 Poly Ribs V-Belts
Section View Top Width Pitch Width Height Angle
PH PJ PK PL PM
Type Wedge Distance Pb mm Wedge Arc Radius, rb, Min. mm Wedge Bottom Arc Radius, rt, Max mm Height, h, Approximate mm Angle Length Range Length Range mm Factory Mark
PH 1.60 0.30 0.15 2.0-3.0 40° - - Le
PJ 2.34 0.40 0.20 3.0-4.0 40° 13"-120" 330-3048 Le
PK 3.56 0.50 0.25 4.0-6.0 40° 22"-120" 559-3048 Le
PL 4.70 0.40 0.40 6.8-7.2 40° 50"-160" 1270-4064 Le
PM 9.40 0.75 0.75 15.5-16.0 40° 100"-160" 2540-4064 Le
Note: The values of wedge distance and belt height are only reference dimensions. The cumulative error of the wedge distance is an important parameter, but it is affected by the working tension and the antibody's elastic modulus of the belt.
Features:
Poly ribs V-belts have the comprehensive advantages of flat transmission belts and combined V-belts, low bending stress and centrifugal stress loss, high transmission efficiency, suitable for multi-axis transmission such as automobile engines, and high-power high-speed systems.
Identification Marks:
Poly ribs V-belts are generally divided into industrial V-ribbed belts and automotive V-ribbed belts. The models of industrial V-ribbed belts are PH, PJ, PhC, PL, PM, and automotive V-ribbed belts only use PK.
Mask Example:
PJ 1270 500J 6
The number of wedge is 6
Effective length is 500inch
Metric effective length is 1270mm
V-ribbed belt model is PJ


31 Industrial T Teeth Timing Belts, Section View Top Width Pitch Width Height Angle, MXL XL L H XH XXH, T2.5 T5 T10 T2660 AT5 AT10 AT20
31 Industrial T Teeth Timing Belts
Section View Top Width Pitch Width Height Angle
MXL XL L H XH XXH
T2.5 T5 T10 T2660 AT5 AT10 AT20
Tooth Code Pitch, Pb mm Tooth Height, Ht mm Belt Thickness, Hs mm Angle β° Length Range mm Code
Belt Width mm
MXL 2.032 0.51 1.14 40° 53-3810 012 019 025 - - - -
3.0 4.8 6.4 - - - -
XL 5.080 1.27 2.30 50° 112-5405 025 031 037 - - - -
6.4 7.9 9.5 - - - -
L 9.525 1.91 3.60 40° 171-7620 050 075 100 - - - -
12.7 19.1 25.4 - - - -
H 12.700 2.29 4.30 40° 368-7620 075
100
150
200 - - -
19.1 25.4 38.1 50.8 - - -
XH
22.225 6.35 11.20 40° 1178-5778 200 300
400 - - - -
50.8
76.2 101.6 - - - -
XXH
31.750 9.53 15.70 40° 1588-7620 200 300 400 500 - - -
50.8 76.2 101.6 127.0 - - -
T2.5
2.5 0.70 1.30 40° 102-1345 4 6 10 - - - -
4 6 10 - - - -
T5
5 1.20 2.20 40° 100-4075 6 10 16 25 - - -
6 10 16 25 - - -
T10
10
2.50 4.50 40° 260-7600 16 25 32 50 - - -
16 25 32 50 - - -
T20 - - - - - 32 50 75 100 - - -
32 50 75 100 - - -
T2660
20
5.00 8.00 40° 1080-7600 - - - - - - -
AT5
5
1.20 2.70 50° 225-1125 6 10 16 25 - - -
6 10 16 25 - - -
AT10
10
2.50 5.00 50° 500-4030 16 25 32 50 - - -
16 25 32 50 - - -
AT20 20 5.00 8.00 50° 1000-7600 32 50 75 100 - - -
32 50 75 100 - - -
H3M S3M R3M - - - - - 6 9 15 - - - -
6 9 15 - - - -
H5M S5M R5M - - - - - 9 15 25 30 - - -
9 15 25 30 - - -
H8M S8M R8M - - - - - 30 40 50 85 - - -
30 40 50 85 - - -
H14M S14M R14M - - - - - 55 85 115 170 - - -
55 85 115 170 - - -
H20M - - - - - 70 85 115 170 230 290 340
70 85 115 170 230 290 340
Standard width size table of various types of synchronous belts, Unit: mm
Features:
Industrial timing belts have the comprehensive advantages of belt transmission, chain transmission and gear transmission. They have the advantages of accurate transmission, stable transmission, low noise, no slip, and low bending loss. The transmission speed ratio can reach 10, the transmission limit speed reaches 50m/s, the transmission power is high, oil and humidity resistance, no lubrication, and adapt to multi-axis transmission..
Mask Example:
150 XL 031
150: Pitch length is 150inch
XL: Model is XL
031: Width is 0.31inch
Mask Example:
T20X2200X50
T20: Model is T20
2200: Pitch length is 2200mm
50: Width is 50mm


32 Industrial Curvilinear Teeth Timing Belts, Section View Top Width Pitch Width Height Angle, H3M H5M H8M H14M H20M S3M S5M S8M S14M R3M R5M R8M R14M
32 Industrial Curvilinear Teeth Timing Belts
Section View Top Width Pitch Width Height Angle
H3M H5M H8M H14M H20M
S3M S5M S8M S14M R3M R5M R8M R14M
Tooth Code Pitch, Pb mm Tooth Height, Ht mm Belt Thickness, Hs mm Length Range mm
H3M 3 1.17 2.40 60-3390
H5M 5 2.06 3.80 780-7000
H8M 8 3.36 6.00 184-7600
H14M 14 6.02 10.00 966-7560
H20M 20 8.40 13.20 2000-6600
S3M 3 1.14 2.20 120-6510
S5M 5 1.91 3.40 150-4000
S8M 8 3.05 5.30 376-6640
S14M 14 5.30 10.20 714-5012
R3M 3 1.15 1.90 90-1863
R5M 5 1.95 3.50 180-2525
R8M 8 3.20 5.50 288-4400
R14M
14 6.00 10.00 966-4956
Mask Example:
2100-H5M-25
2100: Pitch Length is 2100mm
H5M: Type is H5M
25: Width is 25mm
Mask Example:
250-S5M-1000
250: Width is 250mm
S5M: Type is S5M
1000: Pitch Length is 1000mm


33 Nylon Delivery V-Belts, Conveyor Belts, NN100 NN150 N200 NN250 NN300 NN400 NN500
33 Nylon Delivery V-Belts
Conveyor Belts
NN100 NN150 N200 NN250
NN300 NN400 NN500
Nylon Conveyor Belts are made of nylon canvas woven with nylon fiber as the framework materials and covered with high-performance rubber. It has the features such as thin belt, high strength, abrasion resistance, impact resistance, good groove formation, and strong adhesion between layers. It has the characteristics of excellent flexability performance and long service life. It is suitable for conveying materials with conditions such as medium and long distances, high load, high speed, and is widely used in mines, metallurgy, construction, ports, etc.

Specifications and Technical Parameters of Nylon Multi-Layer Fabric-Core Conveyor Belts

Fabric Type Fabric Structure Fabric Specs Ply Thickness mm/p Strength Series N/mm Cover Rubber Thickness mm Width mm Length mm
Warp Weft 2ply 3ply 4ply 5ply 6ply Upper Lower
Nylon (NN) Nylon (NN) Nylon (NN) NN-100 0.75 200 300 400 500 600 1.5-12 0-4.5 400-2200 ?00
NN-150 0.80 300 450 600 750 900
NN-200 0.90 400 600 800 1000 1200 500-2200
NN-250 1.15 500 750 1000 1250 1500
NN-300 1.25 - 900 1200 1500 1800
NN-400 1.45 - - 1600 2000 2400 800-2200
NN-500 1.55 - - 2000 2500 3000
Adhesion and Elongation of Nylon Multi-Layer Fabric-Core Conveyor Belts
Core Material of Belt Carcass Adhesive Strength Elongation
Between Plies, N/mm Between Rubber and Carcass Longitudinal Elongation at Break ? % Longitudinal Elongation ? %
Rubber Thickness ?.5mm, N/mm Rubber Thickness ?.5mm, N/mm
Nylon Canvas ?.50 ?.2 ?.50 10 4.0
Performances of The Covering Layer of Nylon Multi-Layer Fabric-Core Conveyor Belts
Cover Grade Tensile Strength ?MPa Elongation at Break ?% Abrasion ?mm3 Change Rate of Tensile Strength
and Elongation after 70℃x168hrs Aging %
H Strong Cracking Type Working Conditions 24 450 120 -25~+25
D Strong Wear-Resistant Working Conditions 18 400 100 -25~+25
M Normal Working Conditions 15 350 200 -25~+25
L Light Working Conditions 10 300 300 -30~+30


34 Polyester Delivery V-Belts Conveyor Belts, EP80 EP100 EP150 EP200 EP250 EP300 EP350 EP400 EP500
34 Polyester Delivery V-Belts Conveyor Belts
EP80 EP100 EP150 EP200 EP250
EP300 EP350 EP400 EP500

Polyester Conveyor Belts are also called EP conveyor belts. Its skeleton material is polyester canvas interwoven with warp polyester and weft nylon. Its performance is characterized by low elongation in the warp direction and excellent troughing performance in the weft direction, and good water resistance, the wet strength does not decrease, no mildew occurs, and the initial modulus is high. It is suitable for conveying materials in the conditions such as medium and long distances, high loads, and high speed.

Specifications and Technical Parameters of Polyester Multilayer Fabric-Core EP Conveyor Belts

Fabric Type Fabric Structure Fabric Specs Ply Thickness mm/p Strength Series N/mm Cover Rubber Thickness mm Width mm Length mm
Warp Weft 2ply 3ply 4ply 5ply 6ply Upper Lower
Polyester (EP) Polyester (EP) Polyamide (P)
Nylon (NN)
EP80 0.60 160 240 320 400 480 1.5-12 0-4.5 400-2200 ?00
EP100 0.75 200 300 400 500 600
EP150 1.00 300 450 600 750 900
EP200 1.10 400 600 800 1000 1200 500-2200
EP250 1.25 500 750 1000 1250 1500
EP300 1.35 600 900 1200 1500 1800
EP350 1.45 - 1050 1400 1750 2100 800-2200
EP400 1.55 - - 1600 2000 2400 1000-2200
EP500 1.70 - - 2000 2500 3000
Adhesion and Elongation of Polyester Multilayer Fabric-Core EP Conveyor Belts
Core Material of Belt Carcass Adhesive Strength Elongation
Between Plies, N/mm Between Rubber and Carcass Longitudinal Elongation at Break ? % Longitudinal Elongation ? %
Rubber Thickness ?.5mm, N/mm Rubber Thickness ?.5mm, N/mm
Polyester Canvas ?.50 ?.2 ?.50 10 2.0
Performances of The Covering Layer of Nylon Multi-Layer Fabric-Core Conveyor Belts
Cover Grade Tensile Strength ?MPa Elongation at Break ?% Abrasion ?mm3 Change Rate of Tensile Strength
and Elongation after 70℃x168hrs Aging %
H Strong Cracking Type Working Conditions 24 450 120 -25~+25
D Strong Wear-Resistant Working Conditions 18 400 100 -25~+25
M Normal Working Conditions 15 350 200 -25~+25
L Light Working Conditions 10 300 300 -30~+30

Heat-Resistant Conveyor Belts
Features:
The belt cores of heat-resistant conveyor belts are made of cotton canvas and polyester canvas as the skeleton materials, and SBR and CR with good heat resistance are used as the covering rubber and buffer layer, which can be suitable for conveying materials with a temperature below 150°C. It is widely used in cement, coking, metallurgy, steel and other industries.
Type Code Surface Temperatures Suitable for
Heat-Resistant Conveyor Belts
Materials Temperatures Suitable for
Heat-Resistant Conveyor Belts
Characteristics Usage
Normally Use Occasionally High Peak Value
General Heat Resistance T1 60?100?/td> 70?150?/td> 120?/td> Hardening, cracking, unsuitable for use, powders with temperature over 70?/td> Conveyor lines that require wear resistance, such as coke, sintered products, projectiles, dry lime, etc.
Medium Heat Resistance T2 60?125?/td> 70?170?/td> 220?/td> Non-hardening type, medium wear resistance Generally wear-resistant, it can transport materials with low viscosity such as sintered product return ore and cement clinker.
Hight Heat Resistance T3 60?150?/td> 70?200?/td> 260?/td> High pyrolysis, suitable for high temperature and wear-resistant occasions Sintered products, coke, and casting sand require high heat-resistant and wear-resistant conveyor lines


35 Conventional Conveyor Belts, H D L
35 Conventional Conveyor Belts
H D L
-
       Ordinary Conventional Conveyor Belts are glued together by multiple layers of rubber cotton (polyester + cotton) canvas, and covered with rubber on the top and bottom. The product implements the GB/T7984-2001 standard.
       Conveyor belt is the main part of belt conveyor, which plays the role of carrying materials. It is widely used in steel, coal, metallurgy, chemical, electric power, building materials, and food industries.
       Compared with other modes of transportation, the use of conveyor belt as a transportation carrier has the advantages of safe operation, convenient use, easy maintenance, low freight and continuity.
       This kind of conveyor belt is suitable for conveying bulk, granular and powdery materials at room temperature, which are without special corrosiveness under general conditions.
       Variety: According to the performance of the covering rubber, it can be divided into strong scratch type, strong wear type and general working conditions.
       Calculation method: square number of ordinary conventional conveyor belt = belt width * (number of fabric layers + (top rubber + bottom rubber)/1.5) * belt length
Physical and Mechanical Properties of Cover Layer
Performance Level of Cover Layer Tensile Strength ?MPa Elongation at Break ?% Abrasion ?mm3 Change Rate of Tensile Strength
and Elongation after 70℃x168hrs Aging %
H: Strong Cracking Type Working Conditions 24.0 450 120 -25~+25
D: Strong Wear-Resistant Working Conditions 18.0 400 100 -25~+25
L: Normal Working Conditions 15.0 350 200 -25~+25

Tensile Properties at Full Thickness:

a. The longitudinal tensile strength of the belt shall not be lower than the following nominal values: 160, 200, 250, 315, 400N/mm
b. The longitudinal elongation at break of the full thickness of the belt shall not be less than 10%, and the longitudinal reference force elongation of the full thickness of the belt shall not be greater than 4%

Recommended Minimum Drive-Roller Diameter for Conveyor
Canvas Layers 3 4 5 6 7 8
Minimum Drive-Roller Diameter 400 500 600 800 1000 1250
Canvas Model CC-56 CC-56 CC-56 CC-56 CC-56 CC-56

Bonding Strength between Layers
Item Between Fabric Layers Between Cover Layer and Belt Core
Thickness of Cover Layer Thickness of Cover Layer
?.5mm ?.5mm
Average Value of All Samples, N/mm, ?/td> 3.2 2.1 2.7
The Lowest Peak Value of All Samples, N/mm, ?/td> 2.7 1.6 2.2

Oil Resistant Conveyor Belts
1. Product Features and Uses:
Oil Resistant Conveyor Belts are made of cotton canvas, nylon canvas, and polyester canvas, which are refined through calendering, molding, vulcanization and other processes. Oil Resistant Conveyor Belts are suitable for conveying oily materials.
2. Technical Indicators:
2.1. The oil-resistant conveyor belts are divided into two types: wear-resistant (D type) and general (L) according to the performances of the cover rubbers.
2.2. Oil resistance is divided into Y1 and Y2 levels

High Temperature Resistant Conveyor Belts
1. Product Features:
The belt cores of High Temperature Resistant Conveyor Belts are made of polyester canvas with high modulus, low shrinkage and extremely high tensile strength. The covering rubber is made of EPDM or chlorobutyl rubber with good high-temperature resistance, combined with high temperature resistant materials and refined through molding, vulcanization and other processes.
After special immersion and shaping treatment, the belt cores of High Temperature Resistant Conveyor Belts have high adhesive strength. Under normal use conditions below 180? they have small elongation and excellent abrasion resistance performance. They can withstand high temperature of 250?in a short time. They are suitable for using in cement, coking, metallurgy, steel and other industries.

Type and Specifications of High Temperature Resistant Conveyor Belts
Fabric Type Fabric Spec. Strength Series, N/mm Thickness of Cover Rubber, mm Width mm Length m
2ply 3ply 4ply 5ply 6ply Upper Lower
Polyester (EP) EP-80 160 240 320 400 480 1.5~12 1.5~4.5 400~2200 ?00
EP-100 200 300 400 500 600
EP-150 300 450 600 750 900
EP-200 400 600 800 1000 1200
EP-250 500 750 1000 1250 1500
EP-300 600 900 1200 1500 1800
EP-400 800 1200 1600 2000 2400
EP-500 1000 2500 2000 1500 3000

Acid/Alkali Resistant Conveyor Belts
1. Product Features:
Acid/Alkali Resistant Conveyor Belt chooses cotton canvas, nylon canvas or polyester canvas as the belt core, the belt body has good elasticity, good groove forming performance, low elongation, and it is made of acid and alkali resistant materials. The covering layer has good chemical resistance and corrosion resistance, good physical properties.
2. Use:
Acid/Alkali Resistant Conveyor Belt is suitable for chemical plants, fertilizer plants, paper mills and other factories and mining enterprises to transport corrosive materials such as acid or alkali.

Technical Indexs of Acid/Alkali Resistant Conveyor Belts
Items Unit Index
Performance of Cover Layer

Tensile Strength

MPa ?0
Elongation at Break % ?00
Abrasion Lose mm3 ?00
Acid Resistance Coefficient
30% H2SO4, Room Temperature, 24hrs
  ?.7
Adhesion Between Cover Layer and Fabric Layer N/mm ?.1
Between Fabric Layers ?.2

Cold-Resistant Conveyor Belts
1. Product Features:
Cold-Resistant Conveyor Belt choose cotton canvas, nylon canvas, and polyester canvas as the belt core, and the cover rubber is a combination of natural rubber and butadiene rubber. It has the characteristics of high elasticity, impact resistance, and cold resistance, and can be used normally under minus 40°C.
2. Use:
Cold-Resistant Conveyor Belt is suitable for conveying materials in open air or frozen warehouse in cold areas.
3. Technical Indicators:
3.1. The cold-resistant conveyor belts are divided into three types according to the performances of the cover rubbers: scratch-resistant (H), wear-resistant (D), and general (L)
3.2. Divided into two levels, C1 and C2, according to cold resistance. C1 used in environment temperature -45℃~+50? C2 used in environment temperature -60℃~+50?/td>

Pattern Conveyor Belts
The pattern conveyor belt is composed of a belt body and a pattern part. Due to the different materials to be transported and the inclination of the conveyor, the shape and height of the pattern are required to be different.
1. Shape and characteristics:
The surface has a "herringbone" pattern higher than the belt body, pit-shaped, or closed. Each pattern can be divided into three types: high, medium and low.
2. Purpose:
Suitable for conveying powders, granulars and small pieces of materials with an inclination angle ?0 degrees, and can also convey materials in packaging bags.

Endless Conveyor Belts
Features:
The endless conveyor belt is made into a jointless endless conveyor belt during its production process. Its characteristic is that the belt core has no joints and does not affect the service life due to early damage at the joints. The surface of the belt is flat and the tension is uniform, so the belt runs smoothly, The elongation is small in use.


Click submit button, ignore system hint and send email to us.




site search by freefind advanced

  RPM - Rimpex - Logo RPM - Pimpex - Logo RPM - Mimpex - Logo Loowi artToys Logo <sup>®</sup>  
rubberimpex.com plasticimpex.com mouldimpex.com Loowi.com GoldenPalaceGate.com
  rubberplasticmould.com ibmmachine.com
moldimpex.com
iLoowi.com GoldenPalaceGate.cn  
rpm.mobi isbmmachine.com masks machines jindianmen.cn
wastetiresrecycle.com printing-machines.cn hot-stamping-machines.cn hot-stamping-machines.com logistics-forklifts.cn

Copyright © Rimpex@RPM Since 2002 www.rubberimpex.com Sitemap XIAMEN RPM IMP.&EXP. CO.,LTD.