Rimpex Rubber - Technical Proposal for Spongy Tire

征求利用橡胶粉生产再生胶的高效环保脱硫生产线（按1800吨/年、3000吨/年、6000吨/年再生胶产量）联系方式

Technical Proposal For Spongy Tires

Rimpex Rubber provides technical proposal for spongy tires.

Navigation List
Spongy Materials Test Report Cover Spongy Materials Test Data Page Spongy Tire Test Report Cover Spongy Tire Test Data Page One Spongy Tire Test Data Page Two

MA QUALITY AUTHENTICATION TEST REPORT No.:2002W35 TOTAL TWO PAGES
PRODUCTS NAME:	SPONGY MATERIALS
MODEL/SPECIFICATION:	/
TEST CLASSIFIED AS:	CONSIGNING TEST
CONSIGNING PARTY:	*****SPECIAL TYRE FACTORY
ISSUED ON 21ST, DECEMBER, 2002

RECORD:2002.121 TEST No.: 2002W35		PHYSICAL PERFORMANCE TEST REPORT					PAGE TWO/TOTAL TWO

PRODUCTS NAME:		SPONGY MATERIALS		SPECIFICATION/MODEL:		/
MANUFACTURER:		**SPECIAL TYRE FACTORY		TEST CLASSIFIED AS:		CONSIGNING TEST
TEST EQUIPMENT:		RUBBER FATIGUE TEST MACHINE		SAMPLE CODED AS:		2002.121
SAMPLE PROVIDER:		**SPECIAL TYRE FACTORY		TEST SAMPLE:		TWO BLOCKS OF SPONGY MATERIALS
TEST STANDARD:		GJB1355-1992		TEST ITEMS:		PHYSICAL PERFORMANCE OF SPONGY MATERIALS
NOTE	-
TEST RESULT	BEFORE AGING TEST			AFTER 70° CX20HOURS AGING TEST
	TEMPERATURE AFTER MULTI-COMPRESSED ° C	PERMANENT DISTORTION AFTER MULTI-COMPRESSED %	SPONGY MATERIALS STATUS AFTER MULTI-COMPRESSED	TEMPERATURE AFTER MULTI-COMPRESSED ° C	PERMANENT DISTORTION AFTER MULTI-COMPRESSED %	SPONGY MATERIALS STATUS AFTER MULTI-COMPRESSED	SPECIFIC GRAVITY g/cm3	BRITTLENESS TEMPERATURE ° C
	27	0.8	NO CRACK STRIP AND NO PASTINESS	28	1.4	NO CRACK STRIP AND NO PASTINESS	0.50	49
	#THE PHYSICAL PERFORMANCE TEST OF SPONGY MATERIALS IS TAKEN SUBJECT TO GJB1355-1992. #ALL TEST RESULT HAVE MATCHED WITH THE STANDARD REQUIREMENTS. #ALL THE PHYSICAL PERFORMANCE DATA OF SPONGY MATERIALS ARE UP TO GRADE.
	APPROVED BY:	---	CHECKED BY:	---	TESTED BY:	---	DOCUMENTED BY：	---

MA QUALITY AUTHENTICATION TEST REPORT No.:2002H01 TOTAL TWO PAGES
PRODUCTS NAME:	SPONGY TIRE
MODEL/SPECIFICATION:	/
TEST CLASSIFIED AS:	CONSIGNING TEST
CONSIGNING PARTY:	*****SPECIAL TYRE FACTORY

ISSUED ON 21ST, DECEMBER, 2002

RECORD:2002.121

TEST No.: 2002H01

ENDURANCE TEST REPORT

PAGE ONE/TOTAL TWO

TEST CONDITION	BURDEN N	TEST SPEED km/h	DRIVING TIME hour	TEST ENVIRONMENT TEMPERATURE °C	REMARK
	3432	60	100	38±3	a. Outer Girth Before Test : 2149mm b. Transect Width Before Test : 137mm
	-	-	-	-
	-	-	-

TEST RESULT	#SUBJECT TO THE REQUIREMENTS OF GJB225-1986 STANDARD, ALL ENDURANCE TEST RESULT IS UP TO GRADE.
APPROVED BY:		---	CHECKED BY:	---	TESTED BY:	---	DOCUMENTED BY：	---

RECORD:2002.121

TEST No.: 2002H01

ORIGINAL RECORD OF ENDURANCE TEST

PAGE TWO/TOTAL TWO

NORMALTEST TIME h	TEST BURDEN N	TEST SPEED km/h	TRANSECT WIDTH mm				OUTER GIRTH mm	TEMPERATURE OF TIRE SURFACE °C	DAMAGE STATUS
NORMALTEST TIME h	TEST BURDEN N	TEST SPEED km/h	A	B	C	D	OUTER GIRTH mm	TEMPERATURE OF TIRE SURFACE °C	DAMAGE STATUS
2.00	3432	60	137	137	137	138	2149	62	NORMAL
2.00	3432	60	138	138	138	139	2153	62	NORMAL
2.00	3432	60	138	138	138	139	2153	62	NORMAL
2.00	3432	60	138	138	138	139	2153	62	NORMAL
2.00	3432	60	138	139	139	139	2153	61	NORMAL
2.00	3432	60	138	139	139	139	2153	62	NORMAL
2.00	3432	60	138	139	139	139	2153	62	NORMAL
2.00	3432	60	138	139	139	139	2153	62	NORMAL
2.00	3432	60	138	139	139	139	2153	62	NORMAL
2.00	3432	60	138	139	139	139	2153	62	NORMAL
10.00	3432	60	139	139	138	139	2153	59	NORMAL
10.00	3432	60	138	139	139	139	2153	60	NORMAL
10.00	3432	60	138	139	139	139	2152	60	NORMAL
10.00	3432	60	138	139	139	139	2153	58	NORMAL
10.00	3432	60	138	138	138	138	2152	62	NORMAL
10.00	3432	60	138	139	138	138	2152	59	NORMAL
10.00	3432	60	138	139	138	138	2152	59	NORMAL
10.00	3432	60	138	139	139	139	2152	59	NORMAL