Applications:

• FKM Model DS2601-1 and DS2601-2: Additive for High Viscosity Rubber to Lower the Viscosity; O-rings, etc.
• FKM Model DS2602: O-Rings of pressure forming, injection transfer molding and injection moulding, tube of extrusion.
• FKM Model DS2603-1 and DS2603-2: Milling membrane, seals, tube of extrusion.
• FKM Model DS2604-1: Parts of injection, seals for machining system.
• FKM Model DS2604-2: Parts of molding, vulcanizating with high intension.

Brief Introduction:

    FKM is copolymer of HFP and VDF. Normally it is white or light yellow translucent rubber piece without smell, in which fluorine content is over 66%. By molding or extrude process, FKM products have excellent mechanical performance, outstanding anti oil property (fuel oil, synthesis oil, lubricating oil) and high thermal stability.

Package and Transportation:

• FKM is packed in PE bags on which there will show quality certificate, brand, lot No. and net content 20Kgs, then loaded in paper carton 25Kgs/ctn
• FKM is not toxic, inflammable, explosive and corrosive, so it can be transported according to non-dangerous products, and please avoids heat, wet.
• FKM should be stored in clear, dry, shade place avoid any contamination.